TSA 2000 MS Polymer construction adhesive is a one component high-grade MS polymer. It is useful for a wide range of applications in the building and construction industries and can be used across an extensive range of conditions. It has been sourced by Tactile Systems Australia from high-grade manufacturers to provide excellent adhesion and longevity.
TSA MS-2000 CA
12 months from date of manufacture
Ideal for fixing stair nosing, Future-Tech tactile panels, across a wide range of substrates.
Also, able to be used across a wide range of construction and general-purpose applications, where excellent long-term bonding is required. For example, mirrors, windows and siding doors, kitchens and built-in furniture, sanitary application and general construction.
Clean area and remove all grease, dirt, water and surface contaminants prior to application.
For best results, wipe all areas clean with a lint-free cloth and acetone or similar product prior to application.
Some metals, such as aluminium, will benefit from a light abrasion with emery cloth or similar to remove the oxide layer.
Cut seal on top of the cartridge. Screw on the nozzle and cut at a 45°angle.
For best results, cover the outside of joint areas with masking tape before application.
TSA 2000 MS Polymer is available in 310ml cartridges, 24 ctgs/ctn.
Store in a cool dry location below 25⁰C.
Keep away from the heat source and direct sunlight during storage.
Uncured silicone can irritate eyes and skin. If contact is made with eyes, flush with water for 15 minutes and seek medical assistance
Use in well ventilated areas and keep out of reach of children.